2.7 Recommended Prints to Start With
Parts you might like to print to enhance the machine performance at start up.
| Calibration | |
|---|---|
| Image | Description |
| 20mm XYZ Calibration Cube |
| 20 mm XYZ calibration cube for checking the calibration and extrusion http://www.thingiverse.com/thing:214260 |
|
| Heatbed | |
|---|---|
| Image | Description |
| Thumbwheels |
| Print them in XY scale 1.05 enlarged so the 3 mm nut can be pressed in more easily. Four 3 mm regular nuts need to be purchased. http://www.thingiverse.com/thing:1571664 |
|
| Bed Bushings |
| Bed bushings to capture the springs can be found here. http://www.thingiverse.com/thing:1994198 They also prevent the spring to carve into the bed electronic resistance tracks. Needs four M3 nuts for upper bushings. Lower bushings do not need M3 nuts. Four 3 mm regular nuts need to be purchased. |
|
| Mechanical | |
|---|---|
| Image | Description |
| Internal Corner Brackets |
| Replacement of stock L-Bracket http://www.thingiverse.com/thing:1764563 |
|
| Outsider Corner Brackets |
| Extra support for z axis frame's corner brackets http://www.thingiverse.com/thing:1706643 |
|